JVC HR-S7500U Insert Editing, 58EN, Locate End Point, Reset The Counter, Locate Start Point, Mode

58EN

EDITING(cont.)

Insert Editing

Recorder Your VCR

Insert editing replaces part of the recorded scene with new material. Both the picture and Hi-Fi audio soundtrack are replaced with new ones, while the normal audio soundtrack remains unchanged. If you with to change the normal audio track as well, use the audio dubbing function simultaneously. Use your VCR as the recorder.

POWER MENU

PAUSE

Audio/Video cable (supplied)

OG

–	+
	JOG
	SHUTTLE

TIME SCAN SHUTTLE

Source tape

Recorded tape	Before insert editing	Normal
		audio track
	After insert editing
		Video/Hi-Fi
		audio track

Audio/Video signal

Another VCR

Player

1	2	3
UMBER		2
	5	6
4
"0"	8	9
7
C.RESET	0	4

CH+/–

1

PAUSE

	MAKE CONNECTIONS
	Connect the player's VIDEO OUT and AUDIO OUT
	connectors to your VCR's VIDEO IN and AUDIO IN
1 connectors.
	SET RECORDER’S INPUT
	MODE
	Press the remote control's NUMBER key "0" and CH so
2 that "F-1" appears in place of a channel number.
	LOCATE END POINT
	Load the recording cassette into your VCR, and play it
	back to determine the edit-out point (the end of the
3 segment to be replaced) using the JOG/TIME SCAN
	SHUTTLE controls or TIME SCAN 4¢ and PAUSE.
4	RESET THE COUNTER
	Press C.RESET to change the counter display to
	"0:00:00".
5	LOCATE START POINT
	Determine the edit-in point (the beginning of the
	segment to be replaced) using the JOG/TIME SCAN
	SHUTTLE controls or TIME SCAN 4¢ and PAUSE.

●Be sure to engage the Still mode at the edit-in point.

3

TIME SCAN