JVC HR-S7500U manual 42EN, Select S-Vhs Et Set Mode, Engage S-Vhs Et Mode, Super VHS ET

Models: HR-S7500U

1 76
Download 76 pages 26.34 Kb
Page 42
Image 42
42EN

42Super VHS ETSELECT S-VHS ET SET MODEENGAGE S-VHS ET MODEENS-VHS ETManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background

PManual backgroundManual backgroundLAYBACKManual backgroundManual backgroundManual backgroundANDManual backgroundManual backgroundRECORDINGManual backgroundFEATURESManual background(cont.)Manual backgroundManual backgroundManual background

Super VHS ET

Your VCR is equipped with Super VHS ET that makes it possible to record with S-VHS picture quality on VHS cassettes.

 

+

POWER

MENU

 

 

 

JOG

 

 

SHUTTLE

ETVHS -S NOTES:

You cannot activate the S-VHS ET function...

...while recording is in progress.

...while timer-recording (incl. Instant Timer Recording pg. 53 and Automatic Satellite Program Recording pg. 54) is in progress.

...while Video Calibration (pg. 38) is in progress.

...when the VCR's power is off.

S-VHS ET does not work with S-VHS tapes.

1

2

SELECT S-VHS ET SET MODE

Press S-VHS ET. The

 

current setting appears on

 

the screen for about 5

 

seconds.

S-VHS ET : OFF

 

ENGAGE S-VHS ET MODE

While the current setting is displayed on the screen, press S-VHS ET again to set to "ON".

The "S-VHS" indicator lights on the front display panel.

S-VHS ET

This facility allows recording with S-VHS picture quality on VHS cassettes. You can play back those cassettes recorded in S-VHS ET on a VCR equipped with S-VHS ET.

NOTES:

To obtain the highest quality recording and playback pictures over a longer period on this model, S-VHS recording on S-VHS tape is recommended.

You can play back S-VHS ET recordings not only on this VCR but also on another VHS VCR equipped with S-VHS ET.

*It is recommended to specifically label S-VHS ET recordings so you can easily distinguish them from regular VHS recordings.

S-VHS ET recordings can also be played back on an S-VHS VCR or a VHS VCR equipped with SQPB (S-VHS QUASI PLAY- BACK) function. However, there may be cases where S-VHS ET playback is not possible on a particular VCR.

Frequent still, frame-by-frame and slow-motion playback, TIME SCAN SEARCH may damage the tape and cause picture degradation.

With some tapes, better picture quality may not be obtained even with S-VHS ET recording. It is recommended that you do test record beforehand to make sure whether better results can be obtained.

High Grade tapes are recommended for superior results.

Make sure that "VIDEO CALIBRATION" is set to "ON" at the Function screen (pg. 38).

During S-VHS ET playback, noise may appear depending on tape quality.

Noise may appear during still, frame- by-frame, slow-motion playback and TIME SCAN SEARCH.

If the playback picture becomes blurred or interrupted, use a cleaning cassette.

Page 42
Image 42
JVC HR-S7500U manual 42EN, Select S-Vhs Et Set Mode, Engage S-Vhs Et Mode, Super VHS ET, PLAYBACKANDRECORDINGFEATUREScont