JVC HR-S7500U manual Turn On The Tv, Set Tv Brand Code, Operate Tv, SPECIALFEATURESEN61, Stop

SPECIALFEATURESEN61

BR
	SET
TV
TV/VCR
1	ENTER	2
4		5

7 8

0

1

3

2

6

9

4

POWER

NUMBER

TV Multi-Brand Remote Control

The VCR's remote control can control several functions on JVC remote control TVs and on the brands of remote control TVs listed below.

TURN ON THE TV

1 Turn the power on using the TV's remote control.

SET TV BRAND CODE

Refer to the chart in the left column. While holding down

TV on the VCR's remote control, press MBR SET and enter

2 your TV’s brand code using the NUMBER keys, then press

STOP.

Follow the example shown below.

The TV's power should go off. If it does, try other

operations (☞ step 3).

STOP

3

TV CH+/–

TV VOL +/–

	● Once you have set the remote control to operate the
	TV, you don’t have to repeat this step until you
	replace your remote control’s batteries.
	● PANASONIC has two codes. If the TV does not
	function with one code, try entering the other.
3	OPERATE TV
	First, while holding down TV, press the corresponding
	button: POWER, TV CH +/–,TV/VCR, TV VOL +/–,
	NUMBER keys.
	● For some brands of TV, you must press ENTER after
	having pressed the NUMBER keys.

TV BRAND NAME	BRAND CODE
JVC	01
MAGNAVOX	02
MITSUBISHI	03
PANASONIC	04, 11
RCA	05
SHARP	06
SONY	07
TOSHIBA	08
ZENITH	09
HITACHI	10
SAMSUNG	12
SANYO	13
SEARS	13

NOTE:

Depending on the type of TV, there may be cases where some or all functions cannot be operated using the remote control.

(Ex.) To set remote control to RCA 05:

MBR SET

TVA/B

0 5 STOPRelease

Hold	Press in succession
down