JVC HR-S7500U manual Control Screen, Adjust Audio, Recording Level, Return to Normal

44EN

PLAYBACKANDRECORDINGFEATURES(cont.)

MENU

POWER MENU

CH

– +

OK

JOG

SHUTTLE

Hi-Fi Audio Recording Level Control

Your VCR allows manual adjustment of the Hi-Fi audio recording level. Although the preset audio recording level is satisfactory for normal recording, if the sound you are going to record is too loud or too low, adjust the audio recording level while referring to the VCR's audio level meters.

	ACCESS MAIN MENU
1	SCREEN
	Press MENU.
	ACCESS HI-FI REC LEVEL
2	CONTROL SCREEN
	Press CH 5° or TIME SCAN %Þ to move the highlight
	bar (arrow) to "HI-FI REC LEVEL CTL", then press OK or
	TIME SCAN #.

1 2 3

2

4 5 6

7 8 9

0 4

1

3	OK
MENU

TIME SCAN

	SELECT MODE
	Press CH 5° or TIME	HI-FI REC LEVEL CONTROL
	SCAN %Þ to move the
3 highlight bar (arrow) to			PRESET
			=MANUAL
	"MANUAL", then press OK
	or TIME SCAN #.	MIN------+------MAX
		PRESS (5, °), THEN (OK)
		PRESS (MENU) TO END
	ADJUST AUDIO
4	RECORDING LEVEL
	Press TIME SCAN % or Þ.
	● To move the on-screen's audio levels by one division
	of the scale, press TIME SCAN % or TIME SCAN Þ
	briefly for 5 times in succession. To move the audio
	levels faster, keep TIME SCAN % or TIME SCAN Þ
	presssed.
	● Adjust the recording level while watching the VCR's
	audio level meters. Set the level so that maximum
	volume causes the meters to vary between 0dB to 4dB.
	RETURN TO NORMAL
	SCREEN
5 Press MENU.

NOTE:

●Noise will increase if the recording level is too low, while distortion will increase if the level is too high.