60
EN
Audio Dubbing
EDITING
(cont.)
Audio dubbing replaces the normal audio sound of a previously recorded tape with a new soundtrack. Use your VCR as the recorder.
Normal audio track
A.DUB
POWER | MENU |
PAUSE
PLAY
– | + |
| JOG |
| SHUTTLE |
STOP
Pre-recorded tape
Audio-dubbed tape
MAKE CONNECTIONS
1 Connect an audio component to your VCR's AUDIO IN L+ R connectors. *When connecting monaural equipment, use only the VCR's AUDIO IN L connector.
Audio cable
Audio component
(CD player etc.)
NOTES:
●When monitoring the sound during Audio Dubbing, the normal soundtrack is automatically selected. If you wish to hear the
●Audio dubbing stops automatically when the counter reaches "0:00:00", and the VCR enters the Play mode. Check the counter reading before dubbing.
●Audio dubbing cannot be performed on a cassette that has had its record safety tab removed.
●When playing back an
●Picture may be distorted during Audio Dubbing Pause.
●It may be unlawful to record or play back copyrighted material without the consent of the copyright owner.
SET RECORDER’S INPUT MODE
2 Press the remote control's NUMBER key "0" and CH so that
LOCATE START POINT
3 Press PLAY to start playback of the tape in your VCR, and press PAUSE when you find the point where you want to start dubbing.
ENGAGE AUDIO DUBBING
4 Press A.DUB.
●Your VCR enters the Audio Dubbing Pause mode. ( 
blinks, 
and 
light up on the front display panel.)
START DUBBING
5 Engage the audio component's Play mode, then press PLAY to start the tape in your VCR. Audio dubbing begins at this point.
●
blinks and 
is displayed on the front display panel.
●To stop dubbing temporarily, press PAUSE. Press PLAY to resume dubbing.
END AUDIO DUBBING
6 Press STOP to stop the tape in your VCR, and engage the audio component's Stop mode.
