JVC HR-S7500U manual 52ENTIMERRECORDINGcont, Auto SP=EP Timer, Auto Timer

52ENTIMERRECORDING(cont.)

Auto SP=EP Timer

If, when recording in SP mode, there is not enough tape to record the entire program, the VCR automatically switches to EP mode to allow complete recording. This feature is especially handy when recording a program of more than 2 hours in length.

Auto Timer

When the Auto Timer is set to ON the timer is automatically engaged when the VCR's power is turned off. It is automatically disengaged when the VCR is powered back on.

For Example . . .

Recording a program of 140 minutes in length onto a 120- minute tape

Approximately 110 minutes	Approximately 30 minutes
SP mode	EP mode

Total 140 minutes

Make sure you set "AUTO SP=EP TIMER" to “ON” at the Function screen before the timer recording starts.

	ACCESS MAIN MENU
1	SCREEN
	Press MENU.
	ACCESS FUNCTION SET
2	SCREEN
	Move the highlight bar (arrow) to "FUNCTION SET" by
	pressing CH 5° or TIME SCAN %Þ, then press OK or
	TIME SCAN #.
	SELECT AUTO SP=EP
3	TIMER SET MODE
	Move the highlight bar	FUNCTION
	(arrow) to "AUTO SP=EP	AUTO TIMER	OFF
	TIMER" by pressing CH	SUPERIMPOSE	ON
		=AUTO SP=EP TIMER	ON
	5° or TIME SCAN %Þ,	DIGITAL R3	ON
	then press OK or TIME	VIDEO STABILIZER	OFF
	SCAN #to set to "ON".	2ND AUDIO RECORD	OFF
		NEXT PAGE
		SELECT WITH (5,°) AND (OK)
		PRESS (MENU) TO END
	RETURN TO NORMAL
4	SCREEN
	Press MENU.

NOTES:

●If you have programmed the VCR to timer-record 2 or more programs, the second program and those thereafter may not fit on the tape if you set the Auto SP=EP Timer mode to "ON". In this case, make sure the mode is not engaged, then set the tape speed manually during timer programming.

●In order to ensure that the recording fits on the tape, this feature may leave a slight non-recorded section at the end of the tape.

●There may be some noise at the point on the tape where the VCR switches from SP to EP mode.

●The Auto SP=EP Timer feature is not available during ITR (Instant Timer Recording), and the feature will work with the following tapes: T(ST)-30, T(ST)-60, T(ST)-90, and T(ST)-120.

	ACCESS MAIN MENU
1	SCREEN
	Press MENU.
	ACCESS FUNCTION SET
2	SCREEN
	Move the highlight bar (arrow) to "FUNCTION SET" by
	pressing CH5° or TIME SCAN %Þ, then press OK or
	TIME SCAN #.
	SELECT AUTO TIMER SET
3	MODE	FUNCTION
	Move the highlight bar	=AUTO TIMER	OFF
		SUPERIMPOSE	ON
	(arrow) to "AUTO TIMER"
		AUTO SP=EP TIMER	OFF
	by pressing CH5° or	VIDEO STABILIZER	OFF
	TIME SCAN %Þ, then	DIGITAL R3	ON
		2ND AUDIO RECORD	OFF
	press OK or TIME SCAN #	NEXT PAGE
	to set to "ON" or "OFF".	SELECT WITH (5,°) AND (OK)
		PRESS (MENU) TO END
	RETURN TO NORMAL
4	SCREEN
	Press MENU.

NOTE:

For safety, when AUTO TIMER is set to “OFF”, all other VCR functions are disabled while the Timer mode is engaged. To disengage the timer, press TIMER.