JVC HR-S7500U Simple Playback, 22EN, Load A Cassette, Find Program Start Point, Start Playback

22EN

SIMPLEPLAYBACKANDRECORDING

Simple

Playback

Turn on the TV and select the VCR channel 3 or 4 (or AV mode).

1

LOAD A CASSETTE

Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointing towards the VCR. Don’t apply too much pressure when inserting.

●The VCR’s power comes on automatically.

●The counter is automatically reset to "0:00:00".

●If the cassette's record safety tab has been removed, playback begins automatically.

FIND PROGRAM START POINT

POWER MENU

PLAY
–	+
STOP/EJECT	JOG
	SHUTTLE
REW	SHUTTLE
	SCANTIME
	FF

2

3

4

If the tape is advanced past the start point, press REW or turn the TIME SCAN SHUTTLE ring to the left. To go forward, press FF or turn the TIME SCAN SHUTTLE ring to the right.

START PLAYBACK

Press PLAY. "VIDEO CALIBRATION" appears on the screen (when VIDEO CALIBRATION is set to "ON"

☞pg. 38).

STOP PLAYBACK

Press STOP or STOP/EJECT. Then press STOP/EJECT to remove the cassette.

1	2	3
		2
4	5	6
7	8	9
	0	4
	PLAY
1
REW (Rewind)		FF (Fast-Forward)
		3
	STOP

Usable cassettes

Full-Size VHS

T-30 (ST-30**)

T-60 (ST-60**)

T-90

T-120 (ST-120**)

T-160 (ST-160**)

ST-210**

Compact VHS*

TC-20 (ST-C20**)

TC-30 (ST-C30**)

TC-40 (ST-C40**)

*Compact VHS camcorder recordings can be played on this video recorder. Simply place the recorded cassette into a VHS Cassette Adapter and it can be used just like any full-sized VHS cassette.

**This VCR can record on regular VHS and Super VHS cassettes. While only VHS signals can be recorded on regular VHS cassettes, both VHS and Super VHS signals can be recorded and played back using Super VHS cassettes.