EN35
TimeScan
Names of
Speed
Audio output
| Reverse |
|
|
| Forward |
|
|
| |||
|
|
|
|
|
|
|
|
|
|
| |
| Search | Play | *Still | Play |
| Search |
| ||||
|
|
|
|
|
|
|
|
|
|
| |
0 | 1/18 x 1/6 x | 1 x | 2 x | 3 x | 5 x | 7x | |||||
Audio is output. |
| Audio is | Audio | Audio is |
|
| Audio is output. |
| |||
| not output. | is output. | not output. |
|
|
| |||||
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
*Still mode cannot be engaged using the TIME SCAN button. Still mode can only be engaged by pressing the PAUSE button.
●The VCR's TimeScan indicator lights during TimeScan.
●The speed is shown in the upper right corner of the TV screen for approx. 5 seconds.
●The TimeScan search speed is the same for SP and EP recordings.
●To resume normal playback, press PLAY.
●When using the VCR's TIME SCAN SHUTTLE ring, the playback speed may not change depending on how far it is turned.
●When using the VCR's TIME SCAN SHUTTLE ring, the playback speed will change up to 7× and
●Picture may be distorted at the position where the recording speed is switched.
●The picture may be noisy or distorted for a moment when you change the playback speed.
●During
●Depending on the tape in use, noise may appear or the upper part of the picture may be distorted.
●Picture may appear distorted in comparison to normal playback.
●In TimeScan mode there will be a time lag between the video and the audio and noise may appear in the audio signal.
●TimeScan sound quality will differ in comparison to normal playback.
●When material such as music videos where there is
●When the playback direction is reversed, it takes approximately 6 seconds until sound is heard.
If you don't want to hear TimeScan audio, set "TIMESCAN AUDIO" to "OFF" (☞ pg. 36).
0
1
4
SKIP SEARCH
Skip Search
SKIP OVER UNWANTED SECTIONS
1 Press SKIP SEARCH 1 to 4 times during playback. Each press initiates a
NOTES:
●To return to normal playback during a Skip Search, press PLAY.
●If the Skip Menu screen appears, see page 30.