JVC HR-S7500U Edit From A Camcorder, 56EN, EDITINGcont, Make Connections, Load A Cassette, Mode

56EN

Edit From A

Camcorder

Recorder Your VCR

	–	+
POWER	MENU
		JOG
		SHUTTLE

To rear panel	S-VIDEO
REMOTE PAUSE/AV	IN
COMPULINK
connector

VIDEO	AUDIO	S-VIDEO
		cable
IN	IN	(supplied)
		Mini-plug cable
		(not supplied)
		(JVC camcorder
Audio/Video		only)
		AUDIO
cable
		OUT
(supplied)
		EDIT
		S-VIDEO
		OUT
	VIDEO OUT
		Camcorder
		Player
	MENU	CH

	–	+
POWER	MENU
	OK
		JOG
		SHUTTLE

NUMBER "0" 0 4

1

3 OK

MENU

TIME SCAN

EDITING(cont.)

You can use a camcorder as the player and your VCR as the recorder.

1	MAKE CONNECTIONS
	Connect an AV cable between the camcorder’s VIDEO
	OUT and AUDIO OUT connectors and your VCR’s
	VIDEO IN and AUDIO IN connectors.
	● If connecting a camcorder with an S-VIDEO output
	connector, it is recommended to use the S-VIDEO
	connection to minimize picture degradation while editing.
	● When a Master Edit Control-equipped JVC camcorder is
	used, the camcorder is capable of controlling your VCR.
	The mini-plug cable is a mono 3.5 mm mini-plug to
	mono 3.5 mm mini-plug connector.
	● If connecting to a camcorder with a monaural output,
	connect the audio output connector on the
	camcorder to AUDIO IN L of the VCR.
	LOAD A CASSETTE
2 Insert the cassette to be recorded on into the recorder.
	SET RECORDER’S INPUT MODE
	Set to "AUX". Press the NUMBER key “0” and/or CH to
	select depending on the connector being used – "L-1"
3 for the rear AUDIO/VIDEO IN connector, or "F-1" for
	the front AUDIO/VIDEO IN connector.
	If you have connected a JVC Master Edit Control-
	equipped camcorder to...
	... the VCR's rear panel S-VIDEO IN and AUDIO IN
	connectors — step 4
	... the VCR's rear panel VIDEO IN and AUDIO IN
	connectors — step 4
	... the VCR's front panel VIDEO IN and AUDIO IN
	connectors — step 8
	If you are not using a JVC Master Edit Control-equipped
	camcorder — step 12

ACCESS MAIN MENU SCREEN

4	Press MENU.
5	ACCESS FUNCTION SET SCREEN
	Press CH 5° or TIME SCAN %Þ to move the highlight
	bar (arrow) to “FUNCTION SET”, then press OK or
	TIME SCAN #.

	SELECT REAR AUX INPUT SET
6	MODE
	a– S-VHS IN: Move the highlight bar (arrow) to
	"REAR AUX INPUT" by pressing CH 5° or
	TIME SCAN %Þ, then press OK or TIME SCAN #
	to set to "S-VIDEO".
	b– REAR VIDEO: Move the highlight bar (arrow) to
	"REAR AUX INPUT" by pressing CH 5° or
	TIME SCAN %Þ, then press OK or TIME SCAN #
	to set to "VIDEO".
	FUNCTION		PREVIOUS PAGE
	=AUTO TIMER	OFF	AUDIO MONITOR	HI-FI
	SUPERIMPOSE	ON	S-VHS MODE	ON
	AUTO SP=EP TIMER	OFF	AV COMPU-LINK	ON
	DIGITAL R3	ON	VIDEO CALIBRATION	ON
	VIDEO STABILIZER	OFF	TIMESCAN AUDIO	ON
	2ND AUDIO RECORD	OFF	=REAR AUX INPUT	VIDEO
	NEXT PAGE		NEXT PAGE
	SELECT WITH (5,°) AND (OK)		SELECT WITH (5,°) AND (OK)
	PRESS (MENU) TO END		PRESS (MENU) TO END