Sears BFPR100 12, Be careful to assemble all components in the sequence they are presented.

12
STEP
2
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware in this step. DO NOT wrench tighten until the last step.
Some components may be pre-assembled. Nylon lock nuts will not fully screw onto
bolts, they must be wrench tighten to fully go on.
2A. Attach two Frame D (D) to Frame A (A) using:
4 - (#1) M10X70mm Hex Head Bolt
8 - (#3) ø11Xø30X2.5mm Flat Washer
4 - (#4) M10 Nylon Lock Nut
2B. Attach two Frame D (D) to Frame B (B) using:
4 - (#1) M10X70mm Hex Head Bolt
8 - (#3) ø11Xø30X2.5mm Flat Washer
4 - (#4) M10 Nylon Lock Nut