Yamaha mcx-1000 manual Viewing the MusicCAST Server network status, Wireless LAN screen, 111

Wireless LAN screen

Use this screen to set the wireless LAN parameters for the MusicCAST system wireless network.

1Carry out the procedure described on page 108 to display the Expert Settings screen on the on- screen display.

2Use / to move the cursor to “Wireless LAN” and press SELECT.

The Wireless LAN screen appears on the on-screen display.

Configuring the MusicCAST network

To set the ESSID and WEP parameters on this screen use / // to move the cursor to the appropriate field and press SELECT, then use the on screen keyword or a PS/2 keyboard to enter the appropriate setting. Move the cursor to “OK” and press SELECT to confirm your setting, or select “Cancel” and press SELECT to exit the screen without making any changes.

To set the Channel parameter use / // to move the cursor to the appropriate field and press SELECT, then use / to set the appropriate channel. Move the cursor to “OK” and press SELECT to confirm your setting, or select “Cancel” and press SELECT to exit the screen without making any changes.

NOTE

The MusicCAST server uses 128-bit encryption, which requires a 13-digit WEP key. If you enter less than 13 digits, the MusicCAST server automatically adds zeroes to the code you set to make up the difference.

Viewing the MusicCAST Server network status

This section explains how to access and view the Network Status view screens. To access the Network screen, carry out the following procedure:

1 Press TOP MENU.	2 Use / to move the cursor to “System Setup”
The Top Menu appears on the on-screen display.	and press SELECT.
	The System Setup screen appears on the on-screen display.

Configuring the MusicCAST network

111