Using Remote Control
Preparing the Remote Control
Open the battery compartment and insert the batteries. Make sure the polarities (+ and
Do not use rechargeable batteries.
Remote Control Signal
The remote has a range of approximately 5M and works best when pointed directly at the unit horizontally at angles up to 30° from the sensor window of the DVD recorder.
5
300
Easier Application with Remote Control
Function buttons, such as TOOLS or TIMER, are designed to offer you a quick access to intended applica- tions. Press these buttons to go directly to their individual menus and complete your desired tasks. If you would like to quit an application, simply press the designated button again.
Connecting up Your DVD
Recorder
Before you start...
1.Do not plug the AC power cord into the outlet until all other connections are made.
2.It is recommended that you connect VIDEO OUT jack of the DVD recorder directly to the video input of your TV. Connecting VIDEO OUT jack of this recorder to a TV via a VCR may cause a viewing problem when playing a
..........................................................................................
Step 1: Connecting Antenna/Satellite Cables
Option 1 With Cable Box
Wall Outlet Cable Box DVD Recorder TV
1.Use an antenna cable to connect the RF IN jack on the cable box to the antenna outlet on the wall.
2.Use an antenna cable to connect the RF OUT jack on the cable box to the RF IN jack on the DVD recorder.
3.Use an antenna cable to connect the RF OUT jack on the DVD recorder to the RF IN jack on the television.
RF OUT RF IN
Cable box
Antenna cable
OUT
IN
T V | IN |
|
| VIDEO | Wall |
VHF / UHF | R |
|
AUDIO |
| |
| L |
|
Option 2 Without Cable Box
Wall Outlet DVD Recorder TV
1.Use an antenna cable to connect the RF IN jack on the DVD recorder to the antenna outlet on the wall.
2.Use an antenna cable to connect the RF OUT jack on the DVD recorder to the RF IN jack on the television. (Please note that this serves as a
Connecting Up
9
