Philips 7819901511 manual Using Tools Disc Tools, Timer Recording through G-Code System, Erase

You neerd to put the DVD recorder on standby to activate the Timer Recoed function.

This DVD recorder allows users to enter a maximum of 16 Timer Record programs. If your setting list is full, you will need to delete some of the programs before you can input new ones.

This DVD recorder allows users to enter date up to 2099/12/31 (December 31, 2099). Date beyond this day CANNOT be set.

Introducing System Setup(p.12)

..........................................................................................

Timer Recording through G-Code System

Before you start...

•Refer to ‘Using Tools: Record’.

Using Tools:Record (p.20)

..........................................................................................

1.On the Tools menu, press  to select ‘Timer Record’, then press OK.

2.Press  to select ‘G-Code Setting’, then press OK.

EasyAccess_EasyGuider_04_04

3.Press  to select ‘Once’, ‘Daily’ or ‘Weekly’.

4.Press the number buttons (0-9) to enter the G-Code number, then press OK.

EasyAccess_EasyGuider_04_05

5.The ‘Preset Channel’ dialogue box will then appear, if the DVD recorder fails to find information of a corresponding channel. Press to enter the channel number shown on your TV, then press OK.

EasyAccess_EasyGuider_04_05

To make use of the G-Code system for timer recording, you need to match the GCNs (guide channel numbers) used by the G-Code system with the channel numbers shown on your TV, so that the relevant information can be correctly assigned to the programs you would like to record.

6. Press  to select a recording mode, then press OK.

7. The Timer Program information will appear. Press OK

to exit the Timer Record setting.
 You neerd to put the DVD recorder on standby to	Easier
activate the Timer Recoed function.
 This DVD recorder allows users to enter a maximum
of 16 Timer Record programs. If your setting list is	Application&
full, you will need to delete some of the programs
before you can input new ones.

Using Tools: Disc Tools

production tasks. With Disc Tools, you can easily erase	Access
Disc Tools offers a quick access to completing post-
materials on discs, and finalize discs when necessary.

Erase

Before you start, make sure all your important files are safely backed up.

1.On the Tools menu, press  to select ‘Disc Tools’, then press OK.

EasyAccess_EasyGuider_07_01

2.Press  to select ‘Erase’.

EasyAccess_EasyGuider_07_02

21