Nikon COOLPIXP7700BLK manual Self-timer After Release, Vibration Reduction, E73

The Setup Menu

Self-timer: After Release

Press the dbutton Mztab (A10) MSelf-timer: after release

Set whether or not to cancel the self-timer mode (A59), or 10-second, 2-second or 1-second remote mode (E104), after shooting pictures.

Option	Description
Exit self-timer mode	Cancel the self-timer mode after shooting pictures.
	• The setting is not canceled in the quick-response remote or
(default setting)
	smile timer mode (A60).
Stay in self-timer mode	Enable shooting continuously without canceling the setting,
	after shooting pictures.
	• The setting is cancelled when the camera is turned off.

Vibration Reduction

Press the dbutton Mztab (A10) MVibration reduction

	Option	Description
		Compensate camera shake that commonly occurs when
		shooting at the telephoto zoom position or slow shutter speed.
		Camera shake is also compensated when recording movies as
	On	well as when shooting still images. The camera automatically
g		detects the panning direction and only compensates for vibration
	(default setting)	caused by camera shake.
		When the camera is panned horizontally, for example, vibration
		reduction only reduces vertical shake. If the camera is panned
		vertically, vibration reduction only compensates for horizontal shake.
k Off		Vibration reduction is not enabled.

•When using a tripod to stabilize the camera, set vibration reduction to Off. When On is selected, an icon for this setting is displayed on the monitor (A12).

BNotes on Vibration Reduction

•After the power is turned on or the camera enters shooting mode from playback mode, wait until the monitor screen stabilizes before shooting.

•Due to the characteristics of the vibration reduction function, images displayed on the monitor screen immediately after shooting may appear blurry.

•Vibration reduction may be unable to completely eliminate the effects of camera shake in some situations.

•When the Night landscape scene mode is set to Tripod, or Zoom exposure or Defocus during exposure is selected in special effects mode, vibration reduction is not performed even if Vibration reduction is set to On.

Reference Section

E73