Connecting the Camera to a Printer (Direct Print)

Users of PictBridge-compatible (F17) printers can connect the camera directly to the printer and print pictures without using a computer.

Connecting the Camera to a Printer

1 Turn off the camera.

2 Turn on the printer.

Check the printer settings.

3 Connect the camera to the printer using the included USB cable.

Be sure that the plug is oriented correctly. When disconnecting the cable, do not pull the plug at an angle.

4 The camera is automatically turned on.

When connected correctly, the PictBridge startup screen (1) is displayed on the monitor screen of the camera. Then the Print selection screen (2) is displayed.

Print selection

15/11

2012

NO. 32

32

BNotes on Power Source

When connecting the camera to a printer, use a fully charged battery to prevent the camera from turning off unexpectedly.

If the AC Adapter EH-5b and the Power Connector EP-5A (available separately) (E103) are used, COOLPIX P7700 can be powered from an electrical outlet. Do not, under any circumstances, use an AC Adapter other than the EH-5b or a Power Connector other than the EP-5A. Failure to observe this precaution could result in overheating or damage to the camera.

Reference Section

E21

Page 153
Image 153
Nikon COOLPIXP7700BLK manual Connecting the Camera to a Printer Direct Print, Turn off the camera Turn on the printer, E21