Nikon P7700 manual Using the Flash Flash Modes, Lower the Kflash pop-up Control to raise the flash

Features That Can Be Set Using the Multi Selector

Using the Flash (Flash Modes)

You can shoot pictures with a flash by raising the built-in flash. You can set a flash mode that suits the shooting conditions.

1 Lower the K(flash pop-up)

control to raise the flash.

• When the flash is lowered, the flash mode is fixed at W(off ).

Shooting Features

2 Press H(mflash mode) on the multi selector.

3 Press the multi selector to select the desired mode and press the kbutton.

• See “Available Flash Modes” (A57) for more information.

• When the manual flash is selected, select the flash
output and press the kbutton.	Auto

•If the kbutton is not pressed within a few seconds, the selection will be canceled.

• When U(auto) is applied, Dis only displayed for a few seconds even if monitor indicators (A9) are turned on.

4 Frame the subject and shoot.

• When you press the shutter-release button halfway, you can check the current flash mode by the icon at the top of the monitor.

-On: When the shutter-release button is pressed all the

way, the flash will fire in accordance with the flash mode set. When U(auto) is set, the flash will fire if Wis displayed.

-Flashing: The flash is charging. The camera cannot take pictures.

-Off: The flash will not fire when a picture is taken.

56