Nikon COOLPIXP7700BLK manual Saving a Frame from a Movie as a Still Picture, E27, Editing Movies

Editing Movies

BNotes on Editing Movies

•Use a fully charged battery to prevent the camera from turning off during editing. When the battery level is B, movie editing is not possible.

•Once a movie is created through editing, it cannot be used again for extracting a movie. To extract another range, select and edit the original movie.

•Because the edited movies are extracted in one-second units, they may vary slightly from the set start point and end point. Sections shorter than two seconds cannot be extracted.

•Editing functions are not available when there is not enough free space in the internal memory or on the memory card.

CMore Information

See “File and Folder Names” (E100) for more information.

Saving a Frame from a Movie as a Still Picture

A frame from a recorded movie can be extracted and saved as a still picture.

• Pause a movie and display the frame to be extracted (A109).

•Choose Hon the playback control with the multi selector Jor Kand press the kbutton.

7m42s

•When the confirmation dialog is displayed, choose Yes and press the kbutton to save.

•The still picture is saved with Normal as the image quality. The image size is determined by the type (image size) (E28) of the original movie.

For example, a still picture saved from a movie recorded with dHD 1080pP(1920×1080) is i

(1920 × 1080 pixels).

Copy this frame as a still image?

Yes

No

Reference Section

E27