6
7
USING YOUR BLENDER
1.MakesureapplianceisoFF.
2.Placefoodstobeblendedintojar.
3.Placelidonjar;makesurelid capisinplace.
Important: Do not remove lid while blender is running.
4.Plugpowercordintostandardelectricaloutlet.
Note:Wheninuse,donotleaveblenderunattended.Whenusinghardfoods,
suchasice,cheese,nutsandcoffeebeans,keeponehandonlid tokeep
blenderinplace.
5.PressPoWeRbutton.Selectspeedandfunctionfollowingdirectionsbelow.
6.Whenfinished,pressSTART/SToPbutton.Makesurebladeshave
completelystoppedbeforeattemptingtoremoveblendingjarfrombase.
7. Toremovejar,grasphandle,turnslightly
counterclockwisetounlockpositionandliftup
(F).
8. Removelidtopour.
9. Alwaysunplugappliancewhennotinuse
USING MODE FUNCTION
WhenblenderispluggedinandPoWeRbutton
ispressed,speedwillbeshownat1ondisplayin
centerofcontrolpanelandredlightbelowSPeed
indicatorlightinModesectionofcontrolpanelwill
flash (G).
ADJUSTING SPEEDS
1. Press / buttonsbelowdigitaldisplayin
centerofcontrolpaneltoselectspeedthatbest
suitsyourdesiredtask.digitaldisplaywillshow
numberofspeedselected(H).
2. PressSTART/SToPbuttonandblenderwillrun
untilSTART/SToPbuttonispressedagain.
CUPS OZS
F
How to Use
Thisunitisforhouseholduseonly.
GETTING STARTED
• Removeallpackingmaterialandanystickersfromtheproduct.
• Pleasegotowww.prodprotect.com/applicatoregisteryourwarranty.
• WashallremovablepartsasinstructedinCAReANdCleANINGsectionof
thismanual.
Important: This blender has an intelligent system that
automatically shuts off the appliance after  minutes
for speeds  to 8 and after 0 seconds for the PULSE
and CRUSH functions. If this occurs, the LED display
shows "EE"; unplug the unit and wait 0 seconds (C).
BLENDER JAR ASSEMBLY
1.Turnblenderjarupside-downandplaceflaton countertoporworksurface.
2.Putthegasketontop ofthebladeassembly.
3.Placethebladeassemblywithgasketin bottomopeningofthejar,with
bladesdown.
4. Placejarbaseontoblendingjarandrotate
clockwiseuntilitistight(D).
5. Turnassembledblendingjarrightsideup.
6. Placelidwithlidcaponblendingjar.
7. Uncoilpowercordfromstorageareaunderbase.
8. Placejarinunlockedpositiononbaseandturnjar
clockwiseuntiljarisinlockedpositiononbase(E).
9. Blenderisnowreadyforuse.
G
E
CUPS OZS
D

EE

C
ENGLISH
1
H