Lanier MP CW2200/MP, CW2200SP appendix Messages Displayed When Using the Scanner Function

		When Messages Are Displayed on the Control Panel
Messages during Direct print from a removable memory device
Message	Causes	Solutions
"99: Error"	This data cannot be printed.	Check that the data is valid. For details
	The specified data is either	about the kinds of data supported by
	corrupt or not supported by	the Direct printing function from
	the Direct printing function	removable memory devices, see
	from removable memory	"Printing Files from a Memory Storage
	devices.	Device", Print .

If printing does not start, contact your service representative.

•The contents of errors may be printed on the Configuration Page. Check the Configuration Page in conjunction with the error log. For details about how to print the Configuration Page, see "List / Test Print", Print .

Messages Displayed When Using the Scanner Function

This section describes likely causes of and possible solutions for the error messages that appear on the control panel.

• If a message not described here appears, act according to the message.

Message	Causes		Solutions
"Authentication with the	The entered user name or	•	Check that the user name and
destination has failed. Check	password was invalid.		password are correct.
settings. To check the current		•	Check that the ID and password
status, press [Scanned Files
			for the destination folder are
Status]."
			correct.
		•	A password of 128 or more
			characters may not be
			recognized.
"Cannot detect original size.	The original is a	•	Place the original correctly.
Select scan size."	nonstandard size.	• Specify the scan size.

191