Lanier MP CW2200/MP, CW2200SP Specifying the Length of Copy Paper Cut, Synchro Cut, Preset Cut

Specifying the Length of Copy Paper Cut

Specifying the Length of Copy Paper Cut

Specify the length to cut the paper loaded in the paper input location.

•You cannot cut the paper in the paper bypass location. The following paper cut methods are available:

Synchro Cut

Cuts the paper at the same length as the original. If the copy is enlarged or reduced, the machine calculates the appropriate length for the reduce/enlarge ratio and cuts the paper.

Preset Cut

Cuts the paper at a preset size, regardless of the size of the original. You can use this method to copy different sized originals to the same size.

Variable Cut

Cuts the paper to the size entered.

Synchro Cut

Cuts the paper at the same length as the original. If the copy is enlarged or reduced, the machine calculates the appropriate length for the reduce/enlarge ratio and cuts the paper.

1.Press [Synchro Cut].

2.Select Paper Input Location 1 or 2.

3.Place the original, and start scanning.

Preset Cut

Cuts the paper at a preset size, regardless of the size of the original. You can use this method to copy different sized originals to the same size.

55