9.Troubleshooting

4.Select the paper input location from which you want to print out the test pattern, and then press [OK].

5.Check the print results of the test pattern.

Normal print results:

CQA003

• If a nozzle is not firing:

CQA004

The print results of the test pattern correspond to, from left to right, [Black 1], [Black 2], [Cyan], and [Magenta/Yellow] for the [Clean Print-heads] and [Flush Print-heads] functions in [Maintenance].

For example, if the print results indicate that the test pattern of Black 1 is not firing, select [Black 1] for [Clean Print-heads] or [Flush Print-heads] to reactivate the nozzle.

6.Press [Exit].

If a nozzle is not firing, perform head cleaning.

7.Press the [User Tools/Counter] key.

For details about Prevent Paper Abrasion mode, see p.161 "Checking Whether the Print-heads Scratch the Paper".

For details about head cleaning, see p.165 "Clean Print-heads".

164

Page 166
Image 166
Lanier CW2200SP, MP CW2200/MP appendix Normal print results, If a nozzle is not firing, perform head cleaning