Lanier MP CW2200/MP, CW2200SP The machine is changing settings. You cannot use the control panel

	When Messages Are Displayed on the Control Panel
Message	Status
"Setting change..."	The machine is changing settings. You cannot use the control panel
	while this message is displayed. Wait a while.
"Waiting for print data..."	The machine is waiting for the next data to print. Wait a while.
"Suspending print jobs..."	Printing was temporarily suspended because [Job Operation] or the
	[Stop] key was pressed.
"Updating certificate..."	The @Remote certificate is being updated. Wait a while.

Messages displayed on the control panel when using the printer function

• Before turning the main power switch off, see p.37 "Turning On/Off the Power".

Message	Causes	Solutions
"Cannot connect with the	• The wireless LAN board	Turn off the main power switch, and
wireless card. Turn the main	was not inserted when	then confirm the wireless LAN board is
power switch off, then	the machine was turned	inserted correctly. And then, turn on
check the card."	on.	the main power switch again. If the
	• The wireless LAN board	message appears again, contact your
		service representative.
	was pulled out after the
	machine was turned on.
	• The settings are not
	updated although the
	unit is detected.
"Hardware Problem:	An error has occurred in the	Turn off the main power switch, and
Ethernet"	Ethernet interface.	then back on again. If the message
		appears again, contact your service
		representative.
"Hardware Problem: HDD"	An error has occurred in the	Turn off the main power switch, and
	hard disk.	then back on again. If the message
		appears again, contact your service
		representative.

181