Lanier CW2200SP, MP CW2200/MP appendix Flush Print-heads

9.Troubleshooting

5.Press [Exit].

To check the results of head cleaning, print the test pattern.

6.Press the [User Tools/Counter] key.

•If a nozzle still fails to start firing, perform head cleaning again. For details about checking the condition of the print-heads, see p.161 "Checking Whether a Nozzle is Clogged".

•For details about printing the test pattern, see p.163 "Print Nozzle Check Pattern".

Flush Print-heads

Use this function to clean the print-heads far more thoroughly. It consumes much more ink than head cleaning.

Use this function only if repeated head cleaning fails to reactivate a mis- or nonfiring nozzle. Perform this function on a color basis.

•Flushing consumes ink. Perform this function only when necessary.

•Perform no other operations during flushing.

•Flushing is not possible if even one color has run out.

•Flushing may be incomplete if ink in a cartridge gets too low or runs out during flushing.

•An error will occur and flushing will not be possible if:

•There is a misfeed.

•One of the machine's covers is open.

•The machine is performing maintenance operations.

•The machine has run out of ink.

•The machine has run out of paper.

1.Press the [User Tools/Counter] key.

CJS039

166