Lanier MP CW2200/MP, CW2200SP appendix The user name is displayed under USERNAME

Basic Procedure When Using Scan to Folder

4.Next, enter the command "set user", and then press the [Enter] key. (Be sure to put a space between "set" and "user".)

5.Confirm the user name.

The user name is displayed under [USERNAME].

Step 2: Creating a shared folder on a computer running Microsoft Windows

Create a shared destination folder in Windows and enable sharing. In the following procedure, a computer which is running under Windows 7 Ultimate and participating in a domain is used as an example.

•You must log in as an Administrators group member to create a shared folder.

•If "Everyone" is left selected in step 6, the created shared folder will be accessible by all users. This is a security risk, so we recommend that you give access rights only to specific users. Use the following procedure to remove "Everyone" and specify user access rights.

1.Create a folder, just as you would create a normal folder, in a location of your choice on the computer.

2.Right-click the folder, and then click [Properties].

When using Windows XP, right-click the folder, and then click [Sharing and Security].

3.On the [Sharing] tab, select [Advanced Sharing...].

When using Windows XP, on the [Sharing] tab, select [Share this folder]. Proceed to step 5.

4.Select the [Share this folder] check box.

5.Click [Permissions].

6.In the [Group or user names:] list, select "Everyone", and then click [Remove].

7.Click [Add...].

8.In the [Select Users or Groups] window, click [Advanced...].

9.Specify one or more object types, select a location, and then click [Find Now].

10.From the list of results, select the groups and users you want to grant access to, and then click [OK].

11.In the [Select Users or Groups] window, click [OK].

12.In the [Groups or user names:] list, select a group or user, and then, in the [Allow] column of the permissions list, select either the [Full Control] or [Change] check box.

Configure the access permissions for each group and user.

13.Click [OK].

83