Lanier CW2200SP, MP CW2200/MP appendix Message

9. Troubleshooting

Message	Causes	Solutions
"Hardware Problem: USB"	An error has occurred in the	Turn off the main power switch, and
	USB interface.	then back on again. If the message
		appears again, contact your service
		representative.
"Hardware Problem:	The wireless LAN board can	Turn off the main power switch, and
Wireless Card"	be accessed, but an error was	then confirm the wireless LAN board is
	detected.	inserted correctly. And then, turn on
		the main power switch again. If the
		message appears again, contact your
		service representative.
"Load following paper in n.	• The printer driver settings	Check that the printer driver settings
To cancel job, press [Job	are incorrect.	are correct, and then load paper of
Reset]."	• The paper input location	the size selected in the printer driver
		into the paper input location. For
(A figure is placed at n.)	does not contain paper
		details about how to change the
	of the size selected in the
	printer driver.	paper size, see "Changing the Paper
		Size", Paper Specifications and
		Adding Paper .
"Paper size and type are	• The printer driver settings	• Check that the printer driver
mismatched. Select another	are incorrect.	settings are correct, and then
tray from the following and	• The paper input location	load paper of the size selected in
press [Continue]. To cancel		the printer driver into the paper
	does not contain paper
job, press [Job Reset].		input location. For details about
	of the size or type
Paper size and type can		how to change the paper size,
	selected in the printer
also be changed in User		see "Changing the Paper Size",
	driver.
Tools."		Paper Specifications and Adding
		Paper .
		• Select the paper input location
		manually to continue printing, or
		cancel a print job. For details
		about how to select the paper
		input location manually, or
		cancel a print job, see "If an
		Error Occurs with the Specified
		Paper Size and Type", Print .

182