Lanier MP CW2200/MP, CW2200SP changing scan area and scanning, details about how to delete stored

		When Messages Are Displayed on the Control Panel
Message	Causes	Solutions
"Exceeded time limit for	A network error has	• Try the operation again. If the
LDAP server search. Check	occurred and connection	message is still shown, the
the server status."	has failed.	network may be busy.
		• Check that the correct settings for
		LDAP server are listed in
		[Administrator Tools] of [System
		Settings]. For details about LDAP
		server, see "Programming the
		LDAP server", Connecting the
		Machine/ System Settings .
"LDAP server authentication	The user name and	For details about LDAP Authentication,
has failed. Check the	password differ from those	see Security Guide .
settings."	set for LDAP Authentication.
"Memory is full. Cannot	Because of insufficient hard	• Wait for a while, and then retry
scan. The scanned data will	disk space, the first page	the scan operation.
be deleted."	could not be scanned.	• Reduce the scan area or scanning
		resolution. For details about
		changing scan area and scanning
		resolution, see "Various Scan
		Settings", Scan .
		• Delete unneeded stored files. For
		details about how to delete stored
		files, see "Deleting a Stored File",
		Scan .
"Memory is full. Do you	Because there is not enough	Specify whether to use the data or not.
want to store scanned file?"	free hard disk space in the
	machine for storing in the
	Document Server, only some
	of the pages could be
	scanned.
"Memory is full. Press	The scan could not be	Select whether or not to save the
[Write] to write the current	completed because there	scanned document to the memory
scanned data to the memory	was insufficient hard disk	device.
storage device, or press	memory at the time of saving
[Cancel] to delete."	to the memory device.

197