Lanier CW2200SP Print is disabled Ink has run out, Disabled if only one of the four ink, 158

9. Troubleshooting

Problem	Causes	Solutions
Original images are printed	You may have loaded the	Load paper into the paper bypass
on the reverse side of the	paper incorrectly.	location with the print side up. For
paper.		details about loading paper into the
		paper bypass location, see "Loading
		Paper into the Paper Bypass Location",
		Paper Specifications and Adding
		Paper .
Print is disabled.	Ink has run out.	Both Black & White and Color print are
		disabled if only one of the four ink
		colors runs out. Replace the print
		cartridge before this happens. For the
		replacement procedure, see
		"Replacing Print Cartridges",
		Maintenance and Specifications .
Print is disabled.	The ink collector unit is full.	Contact your sales or service
		representative.
Misfeeds occur frequently.	Using curled cut paper often	• Load the paper up side down so
	causes misfeeds or soiled	that the curled edges face
	paper edges.	downward. For details about
		recommended paper, see
		"Recommended Paper", Paper
		Specifications and Adding Paper
		.
		• Lay cut paper on a flat surface to
		prevent paper from curling, and
		do not lean it against the wall. For
		details about the proper way to
		store paper, see "Paper Storage",
		Paper Specifications and Adding
		Paper .
Misfeeds occur frequently.	The paper is wrinkled or has	• Cut folded or wrinkled areas off
	been folded/creased.	the paper roll.
		• Replace cut paper that is folded
		or wrinkled.

158