Lanier CW2200SP, MP CW2200/MP appendix Message

9. Troubleshooting

Message	Causes	Solutions
"Cannot find "XXX" scanner	The main power switch of	Check whether the main power switch
used for the previous scan.	the previously used scanner	of the scanner used for the previous
"YYY" will be used instead."	is not set to "On".	scan is turned on.
("XXX" and "YYY" indicate
scanner names.)
"Cannot find "XXX" scanner	The machine is not	• Check that the previously used
used for the previous scan.	connected to the network	scanner is connected to the
"YYY" will be used instead."	correctly.	network correctly.
("XXX" and "YYY" indicate		• Cancel the personal firewall of
scanner names.)		the client computer. For details
		about firewall, see Windows
		Help.
		• Use an application such as telnet
		to make sure SNMPv1 or
		SNMPv2 is set as the machine's
		protocol. For details about how to
		check this, see "Remote
		Maintenance Using telnet",
		Connecting the Machine/ System
		Settings .
		• Select the scanner used for the
		previous scan.
"Cannot specify any more	The maximum number of	The maximum number of scanning
scanning area."	registerable scan areas has	areas that can be stored is 100. Delete
	been exceeded.	unneeded scanning areas.
"Communication error has	A communication error has	Check whether the client computer can
occurred on the network."	occurred on the network.	use the TCP/IP protocol.

206