Lanier MP CW2200/MP, CW2200SP appendix Do not print on both sides of the paper

Models: MP CW2200/MP CW2200SP

1 220
Download 220 pages 61.56 Kb
Page 123
Image 123
•Do not print on both sides of the paper.

Loading Paper into the Paper Bypass Location

CPT029

7.Close the front cover.

CPT030

8.Follow the on-screen instructions to specify the paper type and thickness of the paper.

Press [Matches] if the paper type and thickness of paper you loaded are the same as those displayed on the screen.

If the paper type and thickness are different from those displayed, press [Does not Match]. Select the proper items according to the paper type and thickness you want to use, and then press [OK].

9.Make sure that [Manual background] appears at the paper bypass location on the screen.

Do not operate the machine while "Please wait." is displayed when the machine is turned on.

Press the rewind button to rewind the roll of paper. Rewinding it manually may cause paper jams.

When [Film (Matted)] is specified for Paper Type or when Prevent Paper Abrasion is specified, press [Exit] on the screen after closing the front cover. You can change the Prevent Paper Abrasion setting in System Settings if necessary. However, if you specify [Film (Matted)] for Paper Type, the Prevent Paper Abrasion setting is automatically selected, and you cannot change it. For details about Prevent Paper Abrasion, see "System Settings", Connecting the Machine/ System Settings Manual background .

Do not print on both sides of the paper.

Do not use paper already printed on.

Do not insert multiple sheets at one time. Doing so can result in jams and poor quality prints.

121

Page 123
Image 123
Lanier MP CW2200/MP, CW2200SP appendix Do not print on both sides of the paper