Lanier MP CW2200/MP When Print Results Are Not Satisfactory, Checking Whether a Nozzle is Clogged

When Print Results Are Not Satisfactory

When Print Results Are Not Satisfactory

If there is a problem with the quality of the printing such as dirty or faint and patchy prints, first check the condition of the machine.

Checking Whether the Print-heads Scratch the Paper

Set Prevent Paper Abrasion mode if the prints have smeared ink.

• Setting Prevent Paper Abrasion mode may result in lower print quality and speed.

Depending on the type of paper, images to be printed, or the print quality, the print-heads may scratch the paper, causing the ink to smear. If this occurs, set Prevent Paper Abrasion mode, and then try printing again.

Prevent Paper Abrasion mode raises the print-heads to prevent smeared ink on the prints.

•If you specify [Film (Matted)] for Paper Type, the machine specifies Prevent Paper Abrasion mode automatically.

•For details about setting Prevent Paper Abrasion mode, see "General Features", Connecting the Machine/ System Settings.

Checking Whether a Nozzle is Clogged

Print the nozzle check test pattern to check whether the print-head nozzles are all ejecting ink properly, and, if necessary, carry out head cleaning or flushing.

1.Print the nozzle check test pattern.

2.If the pattern is patchy, clean the print-heads, then print the test pattern and check the result.

3.Do not use the machine for at least 10 minutes, then print the test pattern again and check the result.

4.Clean the print-heads, and then print the test pattern. Then, clean and print a second time, and then check the result.

5.If the pattern is still patchy, flush the print-heads, then print the test pattern again and check the result.

6.Do not use the machine for at least 10 minutes, then print the test pattern again and check the result.

161