6.Document Server

1.Press the [Home] key on the top left of the control panel, and press the [Document Server] icon on the [Home] screen.

CPL011

2.Press [To Scanning Screen].

3.Press [User Name].

4.Specify a user name, and then press [OK].

The user names shown are names that were registered in the Address Book. To specify a name not shown in the screen, press [Manual Entry], and then enter a user name.

5.Press [File Name].

6.Enter a file name, and then press [OK].

7.Press [Password].

8.Enter a password with the number keys, and then press [OK]. You can use four to eight digits for the password.

9.For double-check, enter the password again, and then press [OK].

10.Specify the original scanning conditions.

11.Place the original.

The original feeds into the machine automatically.

If [Press Start Key] is selected for [Feed Start Method], scanning starts when you press the [Start] key.

The original is scanned.

12.Press [Finish Scanning] after all documents are scanned. The document is saved in the Document Server.

98

Page 100
Image 100
Lanier CW2200SP, MP CW2200/MP appendix Document Server