Lanier CW2200SP, MP CW2200/MP Messages Displayed When Using the Printer Function, Status messages

9. Troubleshooting

•If you set [Memory Full Auto Scan Restart] in [Input / Output] of User Tools to [On], even if the memory becomes full, the memory overflow message will not be displayed. The machine will make copies of the scanned originals first, and then automatically proceed to scan and to copy the remaining originals. In this case, the resulting sorted pages will not be sequential. For details about Memory Full Auto Scan Restart, see "Input / Output", Copy/ Document Server .

Messages Displayed When Using the Printer Function

This section describes the principal messages that appear on the display panel, error logs or reports. If other messages appear, follow their instructions.

Status messages

Message	Status
"Hex Dump Mode"	In Hex Dump Mode, the machine receives data in hexadecimal
	format. Press [Job Reset] to cancel Hex Dump Mode.
"Job Suspended..."	Printing was temporarily stopped by SmartDeviceMonitor for Client.
	You can resume printing via [My Job List] in SmartDeviceMonitor for
	Client, or via the Web Image Monitor. To resume printing via Web
	Image Monitor, ask your system administrator first.
"Offline"	The machine is offline.
"Please wait."	• This message might appear for a second or two while the
	machine is preparing, performing initial adjustments, replenishing
	ink, or executing maintenance operations. Wait a while.
	• The current environmental condition is outside the recommended
	temperature range for the machine. Check the optimum
	environmental conditions for the machine and move it to a
	different location, or leave the machine for a while and allow it to
	adapt to the environment.
"Printing..."	The machine is printing. Wait a while.
"Ready"	This is the default ready message. The machine is ready for use. No
	action is required.
"Resetting job..."	The machine is resetting the print job. Wait until "Ready" appears on
	the display panel.

180