Lanier MP CW2200/MP, CW2200SP appendix Check the Scan Profile configuration

		When Messages Are Displayed on the Control Panel
Message	Causes	Solutions
"Cannot start scanning.	Scan Profile might be	Check the Scan Profile configuration.
Check the setting(s) on the	incorrectly configured.
PC."
"Cannot write on the	The memory device is faulty,	• Check to see if the memory device
memory storage device.	or the file name contains a	is defective.
Check the memory storage	character that cannot be	• Check the memory device. It might
device and machine	used.
		be unformatted, or its format might
settings."
		be incompatible with this machine.
		• Check the file name set at the time
		of scanning. For details about the
		characters that can be used in file
		names, see "Specifying the File
		Name", Scan .
"Cannot write on the	• The memory device is	• Replace the memory device.
memory storage device	full and scan data	• If the document is scanned as
because remaining free	cannot be saved.
		single-page or divided multiple
space is insufficient."
	• Even if the memory	pages, data already written to the
	device appears to have	memory device is saved as is.
	sufficient free space,	Replace the memory device, and
	data might not be	then press [Retry] to save the
	saved if the maximum	remaining data, or press [Cancel]
	number of files that can	to redo the scan.
	be saved is exceeded.
"Cannot write on the	The memory device is write-	Unlock the write-protection on the
memory storage device	protected.	memory device.
because the device is write-
protected."
"Captured file exceeded	The maximum number of	Reduce the number of pages in the
max. number of pages per	pages per file has been	transmitted file, and then resend the
file. Cannot send the	exceeded.	file. For details about the maximum
scanned data."		number of pages per file, see "Storage
		Function", Scan .

193