Lanier MP CW2200/MP, CW2200SP appendix Using the LPR port, Installation starts

Installing the Printer Driver for a Network Connection

2.On the [Start] menu, click [Devices and Printers].

3.Click [Add a printer].

4.Click [Add a network, wireless or Bluetooth printer].

5.Click [The printer that I want isn't listed].

6.In the [Select a shared printer by name] box, enter "http://(machine's IP address or host name)/printer (or ipp)" as the printer's address, and then click [Next].

7.Click [Have Disk...].

8.Insert the provided CD-ROM into the computer's CD-ROM drive. If the [AutoPlay] dialog box appears, click [Close].

9.Click [Browse...], and then specify a location for the INF file.

If the CD-ROM drive is D, the source files of the printer driver are stored in the following locations: 32-bit driver D:\X86\DRIVERS\PS\XP_VISTA\MUI\DISK1

64-bit driver D:\X64\DRIVERS\PS\X64\MUI\DISK1

10.Click [Open].

11.Click [OK] to close the [Install From Disk] window.

12.Select the manufacturer and model name of the machine you want to use, and then click [Next].

The installation starts.

13.Follow the instructions that appear. Modify settings such as printer name and default printer configuration, as necessary. You can also print a test page.

14.Click [Finish].

If a check box for setting the machine as a default printer appears, configure as necessary.

Using the LPR port

1.Quit all applications. (Do not close this manual.)

2.Insert the provided CD-ROM into the computer's CD-ROM drive. If the [AutoPlay] dialog box appears, click [Run AUTORUN.EXE].

3.Select an interface language, and then click [OK].

4.Click [PostScript 3 Printer Driver].

5.The software license agreement appears in the [License Agreement] dialog box. After reading the agreement, click [I accept the agreement.], and then click [Next].

6.Select the check box of the machine model you want to use.

7.Double-click the machine name to display the printer settings.

8.Click [Port :], and then click [Add] in the [Change settings for 'Port'] box.

65