Primera Technology LX200 user manual Installing Label Stock

TOC INDEX

D. INSTALLING LABEL STOCK

Your printer will utilize a wide variety of paper label stock. As long as the label stock is paper and can receive ink jet printing and is within the allotted size, it will work in the printer. Primera carries a large variety of paper label stock that has been converted and ready for use with your printer.

1.	Open the Top Cover.	Label Stock Guide
2. Pull the spring loaded
	label stock guide out far
	enough to fit the label
	stock.
3.	Remove any shipping
	tape from your label
	stock roll to ensure that
	it can unroll freely,
	making certain that no
	adhesive portion is
	exposed. It is important
	to note that any exposed adhesive surface can attach itself
	the inner workings of the print mechanism and cause a
	media jam.

Note: If you are using fan-fold label stock or label stock other than standard square / rectangular die cut labels before continuing see Sections 2E and 2F for additional instructions.

Stock Guide Rollers

4.Place the label stock between the stock guide rollers and release the spring loaded stock guide to hold the label stock. The stock guide rollers allow the label stock roll to move freely.

Hardware and Software Settings 7