Primera Technology LX200 user manual Hardware and Software Setup, Installing the PC Software

TOC INDEX

Section 2: Hardware and Software Setup

A. INSTALLING THE PC SOFTWARE

The Installer Disc has a menu that will guide you through the process of setting up your duplicator. Please refer to the following for more information on each step:

1.Place the Installer CD in your CDRom Drive. The Installer application should automatically launch in a few moments. If it does, proceed to Step 2. If it does not automatically launch, follow these steps:

•Double-click the My Computer Icon, then double-click the icon of the appropriate CD drive containing the Software Installer disc.

•Double-click Installer.exe

2.In the Installer Application, click the Standard Install button. The on screen instructions will guide you step-by- step through the installation process.

B. CONNECTING POWER

1.Locate the power adapter

supplied with your printer.

2. Place one end of the adapter cord into the power port on the rear panel of the printer.

3.Plug the power cord of the

adapter into an available wall outlet or surge protecting power strip. Once the power cord is connected, the printer can be switched on and off using the power switch.

C.CONNECTING THE USB CABLE / INSTALLING THE PRINTER DRIVER

Connect the printer to your PC with your beige USB 2.0 Cable.

Hardware and Software Settings 5