Primera Technology LX200 user manual Through Hole Labels

TOC INDEX

Through Hole Labels

If you are using card stock or label stock that has a hole punch or a notch to identify a transition from backing to label, you can adjust the Sensor Bar to position it over the identifying mark.

The Sensor Bar has a guide in inches and milimeters that will help you identify where to set the bar to align the sensor over any identifying mark or top of a circular shape. To do this, measure the distance from the edge of the label stock to

the correct position on the stock. Set the sensor bar to this measurement. For example, if you have a two inch circular die-cut label, measure from the edge of the label stock to the center of the circle. For this example it should be about

1 1/8 inches. Set the Sensor Bar to this value.

1/2”

Center

of Hole

1 1/8”

Center

of Circle

Through-Hole Labels Circular Labels

10Hardware and Software Settings