Lanier CW2200SP Ldap server are listed, Server, see Programming, Ldap server, Connecting, 194

9. Troubleshooting

Message	Causes	Solutions
"Connection with LDAP	A network error has	• Try the operation again. If the
server has failed. Check the	occurred and connection	message is still shown, the
server status."	has failed.	network may be busy.
		• Check that the correct settings for
		LDAP server are listed in
		[Administrator Tools] of [System
		Settings]. For details about LDAP
		server, see "Programming the
		LDAP server", Connecting the
		Machine/ System Settings .
"Entered user code is not	You have entered an	Check the authentication settings, and
correct. Please re-enter."	incorrect user code.	then enter a correct user code.
"Exceeded max. E-mail size.	The file size per page has	Change the Scanner Features settings
Sending E-mail has been	reached the maximum e-	as follows:
cancelled. Check [Max. E-	mail size specified in	• Increase the e-mail size limit in
mail Size] in Scanner	[Scanner Features].
		[Max. E-mail Size].
Features."
		• Change the [Divide & Send E-
		mail] setting to [Yes (per Page)] or
		[Yes (per Max. Size)]. For details
		about these settings, see "Send
		Settings", Scan .
"Exceeded max. No. of	Search results have	Search again after changing the search
results to display. Max.: n"	exceeded the max.	conditions.
(A figure is placed at n.)	displayable number.
"Exceeded max. data	The scanned data exceeded	Specify the scan size and resolution
capacity. Check scanning	maximum data capacity.	again. Note that it may not be possible
resolution, then press Start		to scan very large originals at a high
key again."		resolution. For details about the settings
		for scan function, see "Relationship
		between Resolution and Scan Size",
		Scan .

194