3M 10700, MN55144-1000 manual Replacement Parts and Service Information

Replacement Parts and Service Information

Spare Parts

The following parts are normal wear items and should be ordered and kept on hand as required.

Qty.	Ref. No.	Part Number	Description
4	10677-8	78-8070-1531-4	Belt, Drive, with Pin

In addition, a tool and spare parts kit supplied with the r70 Random Case Sealer contains the following spare parts:

	Qty.	Ref. No.	Part Number	Description
1		10387-10 (Sec. II)	78-8070-1274-1	Spring, Upper Extension (Silver)
1		10389-10 (Sec. II)	78-8070-1273-3	Spring, Lower Extension (Black)
2		10391-2 (Sec. II)	78-8017-9173-8	Knife, 65 mm (2.56 inches)
4		10391-12 (Sec. II)	78-8052-6602-6	Spring, Cutter

All the above listed parts can be ordered separately and when used should be ordered and kept on hand for spares.

Refer to Section II for recommended taping head spare parts.

Label Kit

If any labels are damaged or destroyed, they must be replaced to ensure operator safety. A label kit (part number 78-8137-1256-5) is available as a stock item. It contains all the safety labels used on the r70 Random Case Sealer.

Tool Kit

A tool kit, part number 78-8098-8868-4, is available for the machine. The kit contains the necessary open end and hex socket wrenches for use with the metric fasteners on the case sealer. The threading tool, part number 78-8076- 4726-4, contained in above kit is also available as a replacement stock item.

Replacement Parts Ordering Information and Service

Refer to the first page of this instruction manual "Replacement Parts and Service Information".

34