Specifications

1.Tape:

For use with Scotch® pressure-sensitive film box sealing tapes.

2.Tape Width:

36 mm or 1 1/2 inches minimum to 48 mm [2 inches] maximum.

3.Tape Roll Diameter:

Up to 405 mm [16 inches] maximum on a 76.2 mm [3 inch] diameter core. (Accommodates all system roll lengths of Scotch® film tapes.)

4.Tape Application Leg Length - Standard:

70 mm ± 6 mm [2 3/4 inches ± 1/4 inch]

Tape Application Leg Length - Optional:

50 mm ± 6 mm [2 inches ± 1/4 inch] (See "Adjustments—Tape Leg Length.")

5.Box Size Capacities:

For use with center seam regular slotted containers.

Minimum

Length:

150 mm [6 inches]

Height:

120 mm [4 3/4 inches] (most 3M-Matic™ Case Sealers)

 

90 mm [3 1/2 inches] (with optional 2 inch leg length)

Width:

115 mm [4 1/2 inches]

Maximum

Unlimited

Limited by

Case Sealer

When upper and lower taping heads are used on 3M-Matic™ case sealers, refer to the respective instruction manual specifications for box weight and size capacities.

6. Operating Rate:

Conveyor speeds up to 0.40 m/s [80 FPM] maximum.

7.Operating Conditions:

Use in dry, relatively clean environments at 5 °C–40 °C [40 °F–105 °F] with clean, dry boxes.

Important: Taping heads should not be washed or subjected to conditions causing moisture condensation on components.

8.Taping Head Dimensions:

Length:

457 mm [18 inches]

Height:

560 mm [22 inches] (with tape drum)

Width:

105 mm [4 1/8 inches] (without mounting spacers)

Weight:

Packaged: 7.7 kg [17 lbs.] Unpackaged: 6.7 kg [15 lbs.]

5

Page 89
Image 89
3M MN55144-1000 Tape Application Leg Length Standard, Tape Application Leg Length Optional, Box Size Capacities, Minimum