Specifications (Continued)
8.Box Board:
Style: regular slotted containers, RSC
125 to 275 P.S.I. bursting test, single wall or double wall B or C flute.
9.Box Weight and Size Capacities:
A. Box Weight Range 5
B. Box Size: | Minimum | Maximum |
Length: | 150 mm [6.0 inches] | Unlimited |
Width: | 150 mm [6.0 inches]* | 550 mm [21.5 inches] |
Height: | 120 mm [4.75 inches]** | 550 mm [21.5 inches] |
*Cartons narrower than 250 mm [10 inches] in width may require more frequent belt replacement because of limited contact area.
**95 mm [3.75 inches] height with heads adjusted to apply 50 mm [2 inches] tape leg lengths. See "Special Setup Procedure".
Note: The case sealer can accommodate most boxes within the size range listed above. However, if the box length (in direction of seal) to box height ratio is 0.5 or less, then several boxes should be test run to ensure proper machine performance.
DETERMINE THE BOX LIMITATIONS BY COMPLETING THIS FORMULA:
BOX LENGTH IN DIRECTION OF SEAL = SHOULD BE GREATER THAN 0.5
BOX HEIGHT
Any box ratio approaching this limitation should be test run to ensure proper performance.
(Specifications continued on next page.)
7
