HP Guest Management Software manual PublicAccessDeviceAccountingEnabled, PublicAccessUsersMaxCount

MIB descriptions

COLUBRIS-PUBLIC-ACCESS-MIB

publicAccessDeviceAccountingEnabled

.1.3.6.1.4.1.8744.5.1.1.2.7read-only

Identifies if accounting information is generated by the device and sent to the AAA server. The device generate RADIUS accounting of type ON and OFF. This also covers accounting of all access-lists independently of where they are used. For accounting, the following status types are generated: START, INTERIM-UPDATE, and STOP. Accounting information is generated only if a valid AAA server profile is configured in the publicAccessDeviceAccountingProfileIndex attribute.

publicAccessDeviceAccountingProfileIndex

.1.3.6.1.4.1.8744.5.1.1.2.8read-only

Identifies the AAA server profile to use for device accounting. This attribute only applies when publicAccessDeviceAccountingEnabled is set to ’enable’. When the special value zero is specified, the value set inside publicAccessDeviceAuthenProfileIndex is used instead.

publicAccessDeviceForceReconfiguration

.1.3.6.1.4.1.8744.5.1.1.2.9read-write

Specify forceReconfiguration(1) to force the device to re-read the local configuration file or re- issue an authentication request to the AAA server, or both based on the value of the publicAccessDeviceConfigMode attribute. Reading this object always returns ’idle’. Re-issuing an authentication only applies if a valid AAA server profile is specified in publicAccessDeviceAuthenProfileIndex.

publicAccessUsersMaxCount

.1.3.6.1.4.1.8744.5.1.1.3.1read-only

Indicates the maximum number of concurrent authenticated users.

publicAccessUsersCount

.1.3.6.1.4.1.8744.5.1.1.3.2read-only

Indicates the number of currently authenticated users.

publicAccessUsersThreshold

.1.3.6.1.4.1.8744.5.1.1.3.3read-write

Specifies the trigger value for sending the publicAccessUsersThresholdTrap. When the number of users logged into the public access interface is equal to or exceeds this threshold value, a publicAccessUsersThresholdTrap is sent. The threshold value cannot exceed publicAccessUsersMaxCount or an error is returned. Set this to zero to disable sending of the publicAccessUsersThresholdTrap.

publicAccessUsersSessionTrapEnabled

.1.3.6.1.4.1.8744.5.1.1.3.4read-write

When set to enable, the publicAccessUsersSessionStart and publicAccessUsersSessionStop traps are generated when a user session begins or ends.

publicAccessUsersConfigTable

.1.3.6.1.4.1.8744.5.1.1.3.5not-accessible

Provides information on the user’s authentication method. In tabular form to allow multiple instances on an agent.

„publicAccessUsersConfigEntry

.1.3.6.1.4.1.8744.5.1.1.3.5.1 not-accessible

An entry in the table.

3-35