MIB descriptions

COLUBRIS-MAINTENANCE-MIB

COLUBRIS-MAINTENANCE-MIB OIDs

firmwarePeriodicUpdate

.1.3.6.1.4.1.8744.5.2.1.1.1read-write

Specifies if firmware updates are automatically triggered on a periodic basis or not.

’true’: Automatically update the firmware based on the information specified in the firmwareUpdateDay and firmwareUpdateTime attributes.

’false’: No firmware update is triggered unless a request is specifically issued using the firmwareUpdateInitiate attribute.

firmwareUpdateDay

.1.3.6.1.4.1.8744.5.2.1.1.2read-write

When firmwarePeriodicUpdate is set to true, this attribute specifies the day that automatic updates will occur.

firmwareUpdateTime

.1.3.6.1.4.1.8744.5.2.1.1.3read-write

When firmwarePeriodicUpdate is set to true, this attribute specifies the time of the day that automatic updates will occur. Specify the time in hours (00-23) and minutes (00-59) in the format HH:MM. The ’:’ character is mandatory between the fields.

firmwareUpdateLocation

.1.3.6.1.4.1.8744.5.2.1.1.4read-write

Specifies the URL where the new firmware file is located. This is used when the firmware update is triggered manually or automatically on a periodic basis.

firmwareUpdateInitiate

.1.3.6.1.4.1.8744.5.2.1.1.5read-write

Triggers a firmware update using the firmware specified in the firmwareUpdateLocation attribute. Reading this attribute always returns ’idle’.

firmwareUpdateNotificationEnabled

.1.3.6.1.4.1.8744.5.2.1.1.6read-write

Specifies if firmwareUpdateNotification notifications are generated.

firmwareUpdateInfo

.1.3.6.1.4.1.8744.5.2.1.1.7read-only

Contains various information about the firmware update and is used with firmware update notifications to provide more detailed information.

firmwareUpdateStatus

.1.3.6.1.4.1.8744.5.2.1.1.8read-only

Contains the status of the current or last firmware download. A Textual error message is available in firmwareUpdateInfo.

configurationPeriodicUpdate

.1.3.6.1.4.1.8744.5.2.1.2.1read-write

Specifies if configuration file updates are automatically triggered on a periodic basis or not.

’true’: Automatically update the configuration file based on the information specified in the configurationUpdateDay and configurationUpdateTime attributes.

3-77