MIB descriptions

COLUBRIS-WDS-MIB

„coWDSLinkRadio

.1.3.6.1.4.1.8744.5.33.1.4.1.1.3read-only

Radio number where the local mesh peer was detected.

„coWDSLinkPeerMacAddress

.1.3.6.1.4.1.8744.5.33.1.4.1.1.4read-only

MAC address of the local mesh peer.

„coWDSLinkMaster

.1.3.6.1.4.1.8744.5.33.1.4.1.1.5read-only

Indicates if this link is a link to a master node, which provides access to the root network for the mesh.

„coWDSLinkAuthorized

.1.3.6.1.4.1.8744.5.33.1.4.1.1.6read-only

Encryption, if any, can proceed.

„coWDSLinkEncryption

.1.3.6.1.4.1.8744.5.33.1.4.1.1.7read-only

Indicates the encryption used by the local mesh link.

„coWDSLinkIdleTime

.1.3.6.1.4.1.8744.5.33.1.4.1.1.8read-only

Inactivity time.

„coWDSLinkSNR

.1.3.6.1.4.1.8744.5.33.1.4.1.1.9read-only

Signal noise ratio of the local mesh peer.

„coWDSLinkTxRate

.1.3.6.1.4.1.8744.5.33.1.4.1.1.10read-only

Current transmit rate of the local mesh peer.

„coWDSLinkRxRate

.1.3.6.1.4.1.8744.5.33.1.4.1.1.11read-only

Current receive rate of the local mesh peer.

„coWDSLinkIfIndex

.1.3.6.1.4.1.8744.5.33.1.4.1.1.12read-only

ifIndex of the associated interface in the ifTable.

„coWDSLinkHT

.1.3.6.1.4.1.8744.5.33.1.4.1.1.13read-only

Indicates if the link is using high throughput data rates.

„coWDSLinkTxMCS

.1.3.6.1.4.1.8744.5.33.1.4.1.1.14read-only

Current transmit MCS of the HT local mesh peer.

„coWDSLinkRxMCS

.1.3.6.1.4.1.8744.5.33.1.4.1.1.15read-only

Current receive MCS of the HT local mesh peer.

3-32