MIB descriptions

COLUBRIS-802DOT11-MIB

„ coDot11ScanIndex

.1.3.6.1.4.1.8744.5.4.1.7.1.1

not-accessible

The auxiliary variable used to identify instances of AP in the scan table.

„coDot11ScanMacAddress

.1.3.6.1.4.1.8744.5.4.1.7.1.2

read-only

The wireless MAC address of the remote device.

„ coDot11ScanChannel

.1.3.6.1.4.1.8744.5.4.1.7.1.3

read-only

The operating frequency channel of the remote device.

„ coDot11ScanSSID

.1.3.6.1.4.1.8744.5.4.1.7.1.4

read-only

The Service Set ID broadcast by the remote device.

„coDot11ScanSignalLevel

.1.3.6.1.4.1.8744.5.4.1.7.1.5

read-only

Strength of the wireless signal.

„coDot11ScanNoiseLevel

.1.3.6.1.4.1.8744.5.4.1.7.1.6

read-only

Level of local background noise.

„ coDot11ScanSNR

.1.3.6.1.4.1.8744.5.4.1.7.1.7

read-only

Relative strength of the signal level compared to the noise level.

„ coDot11ScanStatus

.1.3.6.1.4.1.8744.5.4.1.7.1.8

read-only

The status of the scanned device. ’unknown’: The device could not determine the status of

the scanned AP. ’authorized’: The AP is part of the authorized list of APs. ’unauthorized’: The AP is not part of the authorized list of APs.

„ coDot11ScanPHYType

.1.3.6.1.4.1.8744.5.4.1.7.1.9

read-only

Radio type used by the device.

 

„coDot11ScanInactivityTime

.1.3.6.1.4.1.8744.5.4.1.7.1.10

read-only

Elapsed time since the last beacon was seen for this device.

„coDot11ScanNetworkType

.1.3.6.1.4.1.8744.5.4.1.7.1.11

read-only

Network type used by the device.

„ coDot11ScanSecurity

.1.3.6.1.4.1.8744.5.4.1.7.1.12

read-only

Indicates the WPA/Encryption type used by the wireless station.

3-108