![](/images/backgrounds/286057/hp-procurve-guest-management-software-reference-guide-669811101x1.png)
MIB descriptions
publicAccessRetentionSessionUserName
.1.3.6.1.4.1.8744.5.15.1.1.3.1.3read-only
Indicates the last username used for RADIUS authentication.
publicAccessRetentionSessionStartTime
.1.3.6.1.4.1.8744.5.15.1.1.3.1.4read-only
Indicates when this user session was started.
publicAccessRetentionSessionDuration
.1.3.6.1.4.1.8744.5.15.1.1.3.1.5read-only
Indicates how long the user’s session has been active. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.
publicAccessRetentionSessionStationIpAddress
.1.3.6.1.4.1.8744.5.15.1.1.3.1.6read-only
Indicates the user’s IP address.
publicAccessRetentionSessionPacketsSent
.1.3.6.1.4.1.8744.5.15.1.1.3.1.7read-only
Indicates the total number of IP packets sent by the user. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.
publicAccessRetentionSessionPacketsReceived
.1.3.6.1.4.1.8744.5.15.1.1.3.1.8read-only
Indicates the total number of IP packets received by the user. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.
publicAccessRetentionSessionBytesSent
.1.3.6.1.4.1.8744.5.15.1.1.3.1.9read-only
Indicates the total number of bytes sent by the user. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.
publicAccessRetentionSessionBytesReceived
.1.3.6.1.4.1.8744.5.15.1.1.3.1.10read-only
Indicates the total number of bytes received by the user. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.
publicAccessRetentionSessionSSID
.1.3.6.1.4.1.8744.5.15.1.1.3.1.11read-only
Indicates the user’s Access Point SSID (ONLY when
publicAccessRetentionPeriodicStatsMaxCount
.1.3.6.1.4.1.8744.5.15.1.2.1read-write
Specifies the maximum number of periods to keep inside the table.
publicAccessRetentionPeriodicStatsDuration
.1.3.6.1.4.1.8744.5.15.1.2.2read-write
Specifies the amount of time for a period of an entry inside the table. Changing the value will erase the table contents.