MIB descriptions

COLUBRIS-PUBLIC-ACCESS-MIB

„publicAccessUserApRadioIndex

.1.3.6.1.4.1.8744.5.1.1.3.6.1.22read-only

Indicates the radio to which this user is associated. The index 0 is reserved when location aware is not enabled or not properly configured. It means that the system could not determine on which interface the user is connected. Please note that this information is not related to the standard SNMP interface table. It is a proprietary index information on the Radios in Colubris devices.

„publicAccessUserConfigIndex

.1.3.6.1.4.1.8744.5.1.1.3.6.1.23read-only

Indicates the configuration profile in the publicAccessUsersConfigTable currently associated with this user. When location aware is not enabled or not properly configured, the first SSID of the first radio interface is used as the default configuration profile.

„publicAccessUserConnectedInterface

.1.3.6.1.4.1.8744.5.1.1.3.6.1.24accessible-for-notify

Indicates the device’s logical public interface to which the user is connected. This will always be a string containing ’br0’.

„publicAccessUserBytesSentDropped

.1.3.6.1.4.1.8744.5.1.1.3.6.1.25read-only

Indicates the total number of bytes sent by the user and dropped due to rate limitation. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.

„publicAccessUserBytesReceivedDropped

.1.3.6.1.4.1.8744.5.1.1.3.6.1.26read-only

Indicates the total number of bytes received for the user and dropped due to rate limitation. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.

„publicAccessUserPacketsSentDropped

.1.3.6.1.4.1.8744.5.1.1.3.6.1.27read-only

Indicates the total number of packets sent by the user and dropped due to rate limitation. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.

„publicAccessUserPacketsReceivedDropped

.1.3.6.1.4.1.8744.5.1.1.3.6.1.28read-only

Indicates the total number of packets received for the user and dropped due to rate limitation. When this counter reaches its maximum value, it wraps around and starts increasing again from zero.

„publicAccessUserRateLimitationEnabled

.1.3.6.1.4.1.8744.5.1.1.3.6.1.29read-only

Specifies if rate limitation is enabled for the user.

„publicAccessUserMaxTransmitRate

.1.3.6.1.4.1.8744.5.1.1.3.6.1.30read-only

Specifies the maximum transmit rate for the user.

3-39