MIB descriptions

COLUBRIS-802DOT11-MIB

„coDot11ReceivedFragmentCount

.1.3.6.1.4.1.8744.5.4.2.2.1.10

read-only

This counter is incremented for each successfully received MPDU of type Data or

Management.

„coDot11MulticastReceivedFrameCount

.1.3.6.1.4.1.8744.5.4.2.2.1.11

read-only

This counter is incremented when a MSDU is received with the multicast bit set in the destination MAC address.

„ coDot11FCSErrorCount

.1.3.6.1.4.1.8744.5.4.2.2.1.12

read-only

This counter is incremented when an FCS error is detected in a received MPDU.

„coDot11TransmittedFrameCount

.1.3.6.1.4.1.8744.5.4.2.2.1.13

read-only

This counter is incremented for each successfully transmitted MSDU.

„coDot11WEPUndecryptableCount

.1.3.6.1.4.1.8744.5.4.2.2.1.14

read-only

This counter is incremented when a frame is received with the WEP subfield of the Frame Control field set to one, and the WEPOn value for the key mapped to the TA’s MAC address indicates that the frame should not have been encrypted or that frame is discarded due to the receiving STA not implementing the privacy option.

„coDot11TransmitFrameCount

.1.3.6.1.4.1.8744.5.4.2.2.1.15

read-only

Number of cycles the tx_frame signal is active.

„coDot11ReceiveFrameCount

.1.3.6.1.4.1.8744.5.4.2.2.1.16

read-only

Number of cycles the rx_frame signal is active.

„coDot11ReceiveClearCount

.1.3.6.1.4.1.8744.5.4.2.2.1.17

read-only

Number of cycles the rx_clear signal is active.

„ coDot11CycleCount

.1.3.6.1.4.1.8744.5.4.2.2.1.18

read-only

Number of clock cycles.

 

coDot11PhyOperationTable

.1.3.6.1.4.1.8744.5.4.3.1not-accessible

PHY level attributes concerned with operation. In tabular form to allow multiple instances on an agent.

„coDot11PhyOperationEntry

.1.3.6.1.4.1.8744.5.4.3.1.1

not-accessible

An entry in the coDot11PhyOperation Table.

ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.

3-118