MIB descriptions

COLUBRIS-802DOT11-MIB

„ coDot11DTIMPeriod

.1.3.6.1.4.1.8744.5.4.1.1.1.3

read-write

Specifies the number of beacon intervals that elapse between transmission of Beacons frames containing a TIM element whose DTIM Count field is 0. This value is transmitted in the DTIM Period field of Beacon frames. Client stations use the DTIM to wake up from low-power mode to receive multicast traffic.

„coDot11PrivacyOptionImplemented

.1.3.6.1.4.1.8744.5.4.1.1.1.4

read-only

Indicates if the IEEE 802.11 WEP option is enabled.

„coDot11RSNAOptionImplemented

.1.3.6.1.4.1.8744.5.4.1.1.1.5

read-only

Indicates if the profile is RSNA-capable.

„coDot11NumberOfUsers

.1.3.6.1.4.1.8744.5.4.1.1.1.6

read-only

Indicates the number of users connected via this profile.

„coDot11AddToAssociationNotification

.1.3.6.1.4.1.8744.5.4.1.1.1.7

read-write

Specifies if an association trap notification is sent each time a user connects to this profile.

„coDot11PhyTxPowerAdminLevel

.1.3.6.1.4.1.8744.5.4.1.1.1.8

read-write

Specifies the transmission power of the radio.

„coDot11PhyTxPowerOperLevel

.1.3.6.1.4.1.8744.5.4.1.1.1.9

read-only

Indicates the transmission power of the radio.

„coDot11CurrentSNRLevel

.1.3.6.1.4.1.8744.5.4.1.1.1.10

read-only

Average SNR level for all the connected client stations.

„ coDot11BSSID

.1.3.6.1.4.1.8744.5.4.1.1.1.11

read-only

MAC Address assigned to this device.

 

„coDot11AdminMinimumDataRate

.1.3.6.1.4.1.8744.5.4.1.1.1.12

read-write

Specifies the minimum transmission rate that clients stations must meet in order to connect with this profile. Client stations that are below this setting will not be able to connect.

The value of this object must always be less or equal than the value of coDot11MaximumDataRate.

Allowed values will change according to the state of the radio’s wireless mode (coDot11CurrentOperPHYType).

ieee802dot11b: Lowest, 1, 2, 5.5, 11 Mbps

ieee802dot11a: Lowest, 6, 9, 12, 18, 24, 36, 48, 54 Mbps

3-99