5-28 Administrator’s Handbook
Change Input Filter 1
Enabled: | Yes |
Forward: | Yes |
Call Placement/Idle Reset: | No Change |
Force Routing: | No |
Source IP Address: | 0.0.0.0 |
Source IP Address Mask: | 0.0.0.0 |
Dest. IP Address: | 0.0.0.0 |
Dest. IP Address Mask: | 0.0.0.0 |
TOS: | 0 |
TOS Mask: | 0 |
Protocol Type: | TCP |
Source Port Compare... | No Compare |
Source Port ID: | 0 |
Dest. Port Compare... | Equal |
Dest. Port ID: | 1723 |
Established TCP Conns. Only: | No |
Return/Enter accepts * Tab toggles * ESC cancels.
Enter the packet specific information for this filter.
Select Input Filter 2 and press Return. In the Change Input Filter 2 screen, set the Protocol Type to allow GRE as shown below.
Change Input Filter 2
Enabled: | Yes |
Forward: | Yes |
Call Placement/Idle Reset: | No Change |
Force Routing: | No |
Source IP Address: | 0.0.0.0 |
Source IP Address Mask: | 0.0.0.0 |
Dest. IP Address: | 0.0.0.0 |
Dest. IP Address Mask: | 0.0.0.0 |
TOS: | 0 |
TOS Mask: | 0 |
Protocol Type: | GRE |
Return/Enter accepts * Tab toggles * ESC cancels.
Enter the packet specific information for this filter.
